BANDSAW BLADE ARNZT BI-METAL M51 SPRINT PLUS
Jual bandsaw blade (gergaji pita) Arntz Bi-Metal M51 Sprint Plus
Gergaji Pita (Band saw) digunakan untuk pemotongan segala jenis material baja atau besi,batu granit,dan kaca dengan menggunakan Bandsaw sesuai peruntukkannya.
Bahan : Bi-Metal 51
Menggunakan gigi yang tahan untuk kesulitan memotong bahan dimensi sedang.
Diciptakan untuk:
- Bahan keras dan tangguh sampai 1700 N / mm²
- Baja tahan karat
- Paduan berbasis nikel
- Titanium dan perunggu khusus
- Struktural struktur berdinding tebal
PT SINAR MENTARI JAYA adalah Distributor resmi Arntz® di Indonesia. Kami telah membina hubungan baik dengan Arntz Jerman sejak tahun 2002.
Hubungi kami untuk informasi pemesanan lebih lanjut.
REKOMENDASI TEKNIK:
For Bi-Metal Band Saw Blades
| Material groups | Material specification DIN | Material no. | Cutting speed Vc (m/min) | Cooling fluids |
| CS1/CS2-Plus | Bi-Metal | Cutting oil | Emulsion |
| Structural steels | St 37 – 2 | 1.0037 | 30-50 | 80-100 | | x |
| St 50 – 2 | 1.0050 | 30-45 | 60-85 | | x |
| St 60 – 2 | 1.0060 | 30-40 | 50-70 | | x |
| Case-hardening steels | C 10 | 1.0301 | 40-60 | 80-100 | x | |
| 14 NiCr 14 | 1.5752 | 25-30 | 40-55 | x | |
| 21 NiCrMo 2 | 1.6523 | 30-40 | 50-60 | x | |
| 16 MnCr 5 | 1.7131 | 25-30 | 40-60 | x | |
| Free machining steels | 9 S 20 | 1.0711 | 40-60 | 80-120 | | x |
| 45 S 20 | 1.0727 | 40-60 | 80-120 | | x |
| Heat treatable steels | C 45 | 1.0503 | 35-50 | 60-70 | | x |
| 40 Mn 4 | 1.1157 | 30-40 | 60-70 | | x |
| 36 NiCr 6 | 1.5710 | 30-40 | 60-70 | | x |
| 34 CrNiMo 6 | 1.6582 | 25-35 | 50-65 | | x |
| 42 CrMo 4 | 1.7225 | 25-35 | 50-65 | | x |
| Ball bearing steels | 100 Cr 6 | 1.3505 | 20-30 | 35-50 | | x |
| 100 CrMn 6 | 1.3520 | 20-30 | 35-50 | | x |
| Spring steels | 65 Si 7 | 1.5028 | 25-35 | 45-60 | | x |
| 50 CrV 4 | 1.8159 | 25-35 | 45-60 | | x |
| Unalloyed tool steels | C 125 W C 75 W | 1.1663 | 20-30 | 40-60 | | x |
| | 1.1750 | 20-30 | 40-60 | | x |
| Cold-work tool steels | 125 Cr 1 | 1.2002 | 20-30 | 40-50 | x | x |
| X 210 Cr 12 | 1.2080 | 15-25 | 30-40 | x | x |
| X 155 CrVMo 12 1 | 1.2379 | 15-25 | 30-40 | dry | x |
| X 42 Cr 13 | 1.2083 | 20-25 | 35-45 | x | x |
| X 165 CrV 12 | 1.2201 | 15-25 | 30-45 | x | x |
| 100 CrMo 5 | 1.2303 | 15-30 | 30-50 | x | x |
| X 32 CrMoV 3 3 | 1.2365 | 25-35 | 45-60 | x | x |
| 45 WCrV 7 | 1.2542 | 20-30 | 40-50 | x | |
| Hot-work tool steels | 56 NiCrMoV 7 | 1.2714 | 20-30 | 40-50 | x | x |
| High speed steels | S 6-5-2-5 (E Mo5 Co5) S 2-10-1-8 (M 42) | 1.3243 | 20-30 | 35-45 | | x |
| S 6-5-2 (DMo5) | 1.3247 | 20-30 | 35-45 | | x |
| | 1.3343 | 20-30 | 35-45 | | x |
| Vave steels | X 45 CrSi 9 3 | 1.4718 | - | 30-45 | x | x |
| X 45 CrNiW 18 9 | 1.4873 | - | 30-40 | x | x |
| High temerature steels | X 20 CrMoV 12 1 | 1.4922 | - | 10-30 | x | x |
| X 5 NiCrTi 26 15 | 1.4980 | - | 10-30 | x | x |
| Heat resistant steels | X 10 CrSi 6 | 1.4712 | - | 15-25 | x | x |
| X 10 CrAl 18 | 1.4742 | - | 15-25 | x | x |
| X 15 CrNiSi 25 20 | 1.4841 | - | 15-25 | x | x |
| Stainless steels | X 5 CrNi 18 10 (V2A) | 1.4301 | - | 30-40 | x | x |
| X 6 CrNiMoTi 172 12 2 (V4A) | 1.4571 | - | 30-40 | x | x |
| Steal castings | GS-38 | 1.0420 | 20-30 | 40-60 | | x |
| GS-60 | 1.0558 | 20-30 | 40-60 | | x |
| Cast irons | GG-15 | 0.6015 | 25-30 | 30-60 | dry | |
| GG-30 | 0.6030 | 25-30 | 30-60 | dry | |
| GGG-50 | 0.7050 | 25-30 | 30-60 | dry | |
| GTW-40 | 1.8040 | 25-30 | 30-60 | dry | |
| GTS-65 | 1.8165 | 25-30 | 30-60 | dry | |
| Copper | KE-Cu | 2.0050 | 100-250 | 100-400 | x | x |
| Elektrolyt-Copper | | 100-250 | 100-400 | x | x |
| Brass (copper-zinc alloys) | CuZn 10 | 2.0230 | 100-300 | 100-400 | | x |
| CuZn 31 Si 1 | 2.0490 | 100-250 | 100-400 | | x |
| Aluminium bronze (copper-aluminium alloys) | CuAl 8 | 2.0920 | 20-30 | 35-50 | | x |
| CuAl 10 Fe 3 Mn 2 | 2.0936 | 20-30 | 35-50 | | x |
| Bronze (copper-TIN alloys) | CuSn 6 | 2.1020 | 80-100 | 80-150 | | x |
| CuSn 6 Zn 6 | 2.1080 | 80-100 | 80-150 | | x |
| Red brass (copper-cast alloys) | CuSn 10 Zn | 2.1086 | 30-40 | 50-100 | | x |
| CuSn 5 ZnPb | 2.1096 | 30-40 | 50-100 | | x |
| Nickel base alloys | NiCr 20 TiAl | 2.4631 | - | 10-25 | x | x |
| NiCr 22 FeMo | 2.4972 | - | 10-25 | x | x |
| Aluminium and aluminium alloys | Al 99.5 | 3.0255 | 80-300 | 80-800 | | x |
| AlMgSiPb | 3.0615 | 80-300 | 80-800 | | x |
| G-AlSi 5 Mg | 3.2341 | 80-300 | 80-800 | | x |
| Titanium and titanium alloys | Ti Grade 1 | 3.7025 | - | 10-20 | x | x |
| TiAl 6 V 4 | 3.7164 | - | 10-20 | x | x |
| Thermoplatic plastics | PVC | | 100-400 | 100-400 | dry | |
| Teflon, Hostalen | | 100-400 | 100-400 | dry | |
| Plastics with fibre inlays | Resitex | | 50-200 | 50-300 | dry | |
| Novotex | | 50-200 | 50-300 | dry | |
For Carbide Band Saw Blades
For Cutting Steel
| Material group | Material specifications DIN | Material no. | Cutting speed | Recommended tooth pitch material dimensions |
| Vc(m/min) | 75 - 140 mm | 100 - 350 mm | 300 - 550 mm | over 540 mm |
| Structural steels | St 37/42 | 1.0037/1.0042 | 100-130 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| St 52/60 | 1.0050/1.0060 | 90-120 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Case-hardening steels | C10/C15 | 1.0301/1.0401 | 110-140 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 16 MnCr 5 | 1.7131 | 80-100 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 20 CrMo 5 | 17264 | 80-100 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 21 NiCrMo 2 | 16523 | 70-90 | 3/4 K | 3 tpi 2/3 K | 14/2 K | 0.75/1.25 K |
| Nitrate steels | 34 CrAlNi 7 | 18550 | 45-60 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 34 CrAlMo 5 | 18507 | 45-60 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Free machining steels | 9 S 20 | 10711 | 100-160 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Heat treatable steels | C 35/45 | 1.0501/1.0503 | 90-120 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 42 CrMo 4 | 17225 | 70-90 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 34 CrNiMo 6 | 16582 | 70-90 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Ball bearing steels | 100 Cr 6 | 13505 | 70-90 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 100 CrMo 7 3 | 13536 | 65-85 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Spring steels | 65 Si 7 | 15028 | 65-85 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 50 CrV 4 | 18159 | 65-85 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Unalloyed tool steels | C 125 W | 11663 | 65-80 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| C 80 W 1 | 11525 | 70-85 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Cold-work tool steels | 125 Cr 1 | 12002 | 65-80 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| X 210 Cr 12 | 12080 | 40-50 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| X 155 CrVMO 12 1 | 12379 | 40-50 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 90 MnCrV 8 | 12842 | 45-55 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Hot-work tool steels | 40 CrMnMo 7 | 12311 | 70-90 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| X 40 CrMoV 5 1 | 12344 | 60-80 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0,75/1.25 K |
| 56 NiCrMoV 7 | 12714 | 50-70 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0,75/1.25 K |
| 40 CrMnNiMo 8 6 4 | 12738 | 35-50 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| High speed steels | S 6-5-2 | 13343 | 50-60 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| S 3-3-2 | 13333 | 55-65 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| S 2-10-1-8 | 13247 | 45-60 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| S 10-4-3-10 | 13207 | 45-60 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| S 18-0-1 | 13355 | 45-60 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Stainless steels | X 5 CrNi 18 10 | 14301 | 70-80 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| X 6CrNiMoTi 17 122 | 14571 | 65-75 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| X 20 Cr 13 | 14021 | 80-100 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Valve steels | X 45 CrSi 9 3 | 14718 | 50-60 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| X 45 CrNiW 18 9 | 14873 | 40-50 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| High temperature steels | X 12 CrCoNi 21 20 | 14971 | 30-40 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| X 20 CrMoWV 12 1 | 14935 | 80-100 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Heat resistant steels | X 15 CrNiSi 25 20 | 14841 | 30-40 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| X 12 NiCrSi 36 16 | 14864 | 30-40 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Special alloys | NiCr 19 NbMo | 24668 | 20-30 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| NiMo 30 | 24810 | 22-35 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| NiCr 13 Mo 6 Ti 3 | 24662 | 20-30 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| NiCo 20 Cr 20 MoTi | 24650 | 22-35 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| X 8 CrNiAlTi 20 20 | 14847 | 22-35 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Heat treated steels | | | | | | | |
| 1000 - 1200 N/mm2 | | | 35-50 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 1200 - 1400 N/mm2 | | | 30-45 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 1400 - 1600 N/mm2 | | | 25-35 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Hardened steels | | | | | | | |
| 50 HRC | | | 15-20 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 55 HRC | | | 42278 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| 60 HRC | | | 43442 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Steel castings | GS-38 | 10420 | 70-100 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| GS-60 | 10558 | 60-85 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| Cast irons | GG-30 | 4,1875 | 60-80 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
| GGG-50 | 0.7050 | 55-75 | 3/4 K | 3 tpi 2/3 K | 1.4/2 K | 0.75/1.25 K |
For Carbide Band Saw Blades
For cutting non ferrous metals
| Material group | Material specifications DIN | Material no. | Cutting speed | Recommended tooth pitch Material dimensions |
| Vc (m/min) | 75 - 140 mm | 100 - 350 mm | 300 - 550 mm | ab 540 mm |
| Aluminium and aluminium alloys | Al 99,5 | 30255 | up to 3000 m/min. | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| AlMg 1 | 33315 | up to 3000 m/min. | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| AlMg 3 | 33535 | up to 3000 m/min. | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| AlMg 4.5Mn | 33547 | up to 3000 m/min. | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| AlMgSi 1 | 32315 | up to 3000 m/min. | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| Copper | KE-Cu | 20050 | 100-200 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| E-Cu | 20060 | 100-200 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| Brass (copper-zinc alloys) | CuZn 39 Pb 3 | 20401 | 150-250 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| VuZn 31 Si | 20230 | 150-250 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| Bronze | CuSn 6 | 21020 | 90-130 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| Red brass | CuSn 5 ZnPb | 21096 | 90-130 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| CuSn 10 Zn | 21086 | 90-130 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| Aluminium-Bronze | CuAl 8 | 20920 | 60-80 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| CuAl 8 Fe 38 | 2.0920.60 | 52-65 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| CuAl 10 Ni 5 Fe 4 | 20966 | 50-70 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| Titanium and titanium alloys | Ti Grade 1 | 37025 | 80-100 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |
| TiAl 6 V 4 | 37164 | 60-90 | 3/4 K | 3 tpi 2/3 K | 1,4/2 K | 0.75/1.25 K |